- Electric Soldering Irons[10]
- Welding Tips[10]
- Pliers[10]
- Other Welding & Soldering Supplies[7]
- Other Welding Equipment[10]
- Other Hand Tools[10]
- Testing Equipment[1]
- Multimeters[10]
- Scissors[1]
- Heat Gun[4]
- Other Safety Products[2]
- Other Electronic Components[8]
- Contact Person : Mr. Yan Simon
- Company Name : Shenzhen Green Electronics Co., Ltd.
- Tel : 86-755-29933015
- Fax : 86-755-29933180
- Address : Guangdong,SHENZHEN,BLOCK J,NO.5,LINE4,XINFA INDUSTRIAL PARK,XINQIAO,SHAJING,BAO'AN DISTRICT,SHENZHEN
- Country/Region : China
- Zip : 518104
HAKKO-498 system tester tools
HAKKO-498 system tester tools
Specifications:Instruction | Impedance calibration | Buzzer |
Low(red) | R<800KΩ | OFF |
Good(green) | 800KΩ≤R≤9MΩ | ON |
High(red) | R>9MΩ | OFF |
Outside size 80(W)×40(H) ×117(D)mm | ||
Power source:9V battery | ||
The length of grounding wire:2.5m | ||
Operation:
1. Insert the banana plug on the end of the static strap ground cord into the jack located on the front of the wrist strap tester. 2. The wearer of the anti-static wrist strap then pushes the metal pushbutton on the wrist strap tester. 3. A properly operating wrist strap will give an "OK" LED indication on the anti-static wrist strap tester. If either RED "FAIL LOW" or YELLOW "FAIL HIGH" LED's light, and the audible indicator sounds, then the wrist strap should be discarded and replaced with a new one
HAKKO-498 system tester tools
